[BLACK BOX v3.0] SOUND-ACTIVATED CAMERA TRIGGER FOR HIGH SPEED PHOTOGRAPHY
SOUND-ACTIVATED FLASH TRIGGER FOR HIGH SPEED FLASH PHOTOGRAPHY
Specially for high-speed photographers and photography enthusiasts!
Essentially, this device will trigger the flash once an impact occurs (which will generate a sound) on the object that’s to be photographed. The sound is then received by the device and will the trigger the activation of the camera. Before turning on the camera device, there are a few settings to be made, from the settings of the light mode to the delay settings. With this device, photographers can shoot object impacts at high speeds with the right moment exposure. This device can work well in a dimly-lit room because when using this device, the camera’s shutter is on the BULB settings or its speed is less than 1 second.
*** Main Features ***
1. Uses an AT-Mega8 Microcontroller as its main control system.
2. Includes an internal sound activator which converts sound singlas into digital signals; and also includes a dial with which the user can set the sensitivity of the sound activator.
3. Also includes an external microphone/microphone condenser. A microphone jack is located on the side of the device, in which if an external microphone is plugged in, the internal sound activator is automatically deactivated.
4. Consists of 3 shot modes: SINGLE SHOT, MULTIPLE SHOTS, and STROBE SHOTS.
5. Consists of 3 delay modes: SOUND DELAY, MULTIPLE COUNTER, and STROBE COUNTER.
6. Powered by 2 9volt-batteries, making this device very compact and mobile.
7. Uses a 16x2 LCD as the display which eases the user in setting the desired modes.
***MODES***
1. SINGLE SHOT: this mode activates the flash device once in a single session.
2. MULTIPLE COUNTER: this mode activates the camera device as many times as it recieves sound signals.
3. STROBE SHOTS: this mode activates the camera device continuously as many times as it recieves sound signals.
***DELAYS***
1. Sound Delay: The duration of the delay between when a sound signal is received and when the sound activator activates a flash device.
2. Multiple Counter: The counter of the camera activation in the MULTIPLE SHOTS.
3. Strobe delay: The duration of camera activations desired during STROBE MODE.
Which includes:
- 1 unit SOUND-ACTIVATED FLASH TRIGGER
- 2 units of 9-volt batteries (already placed inside the device)
- 1 unit shutter release cable cable
- 1 unit manual and tutorial CD
- 1 month of hardware warranty and 6 months of firmware and maintenance warranty. ***
Place orders to:
Maulana N
Yahoo Messenger ID: Maulanaphotoworks
E-Mail: maulanaphotoworks@yahoo.com
For those residing in the DIY (Daerah Istimewa Yogyakarta) area, device can be tried/bought in person at the following address:
TOKO PINO
Jl. Tunjung Baru 15
Yogyakarta
55166
***Warranties void outside of Indonesia
No comments:
Post a Comment